Honeywell HRXDS16D1T User Manual page 96

7.
8.
9.
10. Highlight the box beside Transaction End, then press #. Use the virtual keyboard
11. Highlight the more line(s) box, then press #. Select the number of additional lines
12. Highlight the box beside Line Delimiter, then press #. Use the virtual keyboard to
13. Highlight the box beside Ignore String, then press #. Use the virtual keyboard to
14. Highlight the Case Sensitive box, then press # to toggle between On and Off.
15. Highlight the box beside Time Out, then press #. Set the length of time to wait for
16. Highlight the Actions 1 and Actions 2 tabs to display the Text-In Actions 1 and
96
Note The screen changes for different types of text input devices, and
there will be different parameter boxes for you to enter
information.
Highlight the box beside Virtual Port, then press #. Adjust the port number to use.
This field will be activated only when setting up the VP Filter device.
Highlight the box beside Transaction Start, then press #. Use the virtual
keyboard to enter the Transaction Start string. Refer to the device manufacturer's
documentation for the text string that the device first sends when a transaction
starts.
If you want the DVR to react to any character sent from the text input device, you
will want to turn On Any Character. Highlight Any Character, then press # to
toggle between On and Off.
Note If Any Character is turned On, you will not be able to enter any
text in the Transaction Start box.
to enter the Transaction End string. Refer to the device manufacturer's
documentation for the text string that the device sends when a transaction ends.
of text that you want the DVR to record, from 0 to 10.
enter the character(s) that the device uses to indicate the end of a line. Special
characters can be created using ^ and a capital letter; for example, ^J for NL
(New Line), ^M for CR (Carriage Return). Refer to the device manufacturer's
documentation for Line Delimiter character(s).
enter any strings of text that you want the DVR to ignore. Refer to the device
manufacturer's documentation for text strings that the device sends during
transactions, so you will know which ones you do not want recorded.
Refer to the device manufacturer's documentation to determine if the text strings
are Case Sensitive. If the device distinguishes between upper and lower case
letters, make certain the Case Sensitive box is turned On.
the new text string. The DVR will consider a transaction complete if no new text
strings are entered between the last text input and the dwell time out. You can
adjust the Time Out dwell from 5 seconds to 15 minutes.
Actions 2 screens (see Figure 3-73 and Figure 3-74
HRXDS Series DVR User Guide
respectively).