Figure 3-19 New Group Setup Screen - Honeywell HRXDS16D1T User Manual

Configuration
4.
Caution
5.
6.
7.
8.
Document 800-04559 Rev D
11/09
To change the authority levels assigned to the group, highlight a Group Name,
then press #.
Figure 3-19
Write down the new password and save it in a secure place. If the
password is forgotten, the unit must be reset using the Factory
Reset Button and all data settings will be lost.
To add or change the password assigned to a user, highlight a User Name, then
press #. You can also change the group to which the user is assigned.
The column can be used to delete a User Name or an entire Group. If the
grayed out, that Group or User cannot be deleted. Highlight
will be asked to confirm that you want to delete the User or Group.
To delete the User currently logged into the DVR on a local system or a PC
running RAS, log the user out of the system first and then delete the user.
To add a Group, highlight the + Group... box, then press #. A virtual keyboard
appears, allowing you to enter the Group name. You can use up to 15 characters
including spaces in the group name.
Now you can assign authority levels to the group. Highlight the Authority box,
then press # to toggle between all authority levels being turned On and Off. The
authority levels that can be turned On and Off are:
Authority Level
Shutdown
Upgrade
System Time
Change
Data Clear
Setup
New Group Setup Screen
Description
The user can shut the system down on a local system.
The user can upgrade the software on a local system or a PC
running RAS.
The user can change the system date and time on a local
system or a PC running RAS.
The user can clear all video data or format disks on a local
system or a PC running RAS.
The user without Setup authority cannot establish any
system settings excluding system shutdown and logout on
a local system or a PC running RAS.
is
, then press #. You
55