Figure 3-71 Text-In Device (Vp Filter) Settings Screen; Figure 3-72 Text-In Device (Generic Text, Epson-Pos) Settings Screen - Honeywell HRXDS16D1T User Manual

Configuration
4.
5.
6.
Document 800-04559 Rev D
11/09
Figure 3-71
Figure 3-72
Highlight the box beside Port, then press #. Select from None, RS232, RS485 and
USB-Serial (1~8).
Note If you have set the Port as None, you will not be able to make
any changes to the screen.
Note When using the USB to serial text-in device, do NOT remove the
USB cable from the port while the system is running.
Highlight Setup..., then press #. Use the ATM or POS manufacturer's
recommended settings when configuring the RS232, RS485 or USB-Serial ports.
Highlight the box beside Text-In Product, then press #. Select your device from
the list.
Text-In Device (VP Filter) Settings Screen
Text-In Device (Generic Text, EPSON-POS) Settings
Screen
95