Image Adjustment; Figure 4-3 Ptz Menu; Figure 4-4 Ptz Toolbar Controls - Honeywell HRXDS16D1T User Manual

Operation
7.

Image Adjustment

Document 800-04559 Rev D
11/09
Figure 4-3
You can use a mouse for convenient PTZ control. Position the mouse pointer at
the bottom of the screen, and the following PTZ toolbar will display.
Figure 4-4
Click on the left side exits the toolbar. If you want to display the toolbar again,
position the mouse pointer at the bottom of the screen.
Change the toolbar location by clicking the empty space on the left side of the
toolbar and drag it to where you want it located on the screen.
Use the arrow buttons on the toolbar to pan or tilt the camera in the direction you
want.
The other controls on the toolbar perform as described below:
PTZ Toolbar Controls
Note It is important that cameras and monitors are correctly installed
and adjusted prior to making any image adjustments using the
DVR's controls.
PTZ Menu
PTZ Toolbar Controls
Function
Zoom in / zoom out
Iris open / iris close
Focus in / focus out
Set / load preset
107