Upgrading The Driver And Client Utilities - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Upgrading the Client Adapter Software
Figure 8-3
Perform one of the following:
Step 19
•
•
Step 20 Tap OK.
Note
A progress bar displays as the new firmware is loaded. If the selected image is loaded successfully into
the client adapter's Flash memory, a "Firmware Upgrade Complete!" message appears.
Tap OK to exit the Firmware screen.
Step 21

Upgrading the Driver and Client Utilities

Follow the instructions in this section to find the versions of your client adapter's driver and client
utilities and to upgrade them if more recent versions are available from Cisco.com.
The driver, client utilities, and online help files are installed together.
Note
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
8-6
Open Window
If you are using a PPC device, select the folder from the Folder drop-down menu where the new
firmware image is located. Then tap the new firmware image file (*.img) in the Name field in the
center of the window.
If you are using an HPC or Windows CE .NET device, locate the new firmware image file (*.img)
and select it so that it appears in the Name field at the bottom of the screen.
If the OK button is unavailable, tap the Enter key on the Windows CE device's keyboard.
Chapter 8 Routine Procedures
OL-1375-04