Overview; Using Leap Or Eap-Fast; With A Temporary Username And Password - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Overview

Overview
This chapter explains the sequence of events that occurs as soon as you select a profile that uses EAP
authentication as well as after you eject and reinsert the client adapter, reset the Windows CE device, or
are informed that your username and password have expired. The chapter contains three sections based
on the profile's authentication type:
•
•
•
Follow the instructions for your profile's authentication type to successfully authenticate.
Note If any error messages appear during authentication, refer to
recommended actions.

Using LEAP or EAP-FAST

With a Temporary Username and Password

After you select a profile that uses LEAP or EAP-FAST authentication (with a temporary username and
password) or you eject and reinsert the client adapter or reset your Windows CE device while this profile
is selected, follow these steps to authenticate using LEAP or EAP-FAST.
The Wireless Login Module screen appears (see
Step 1
Figure 6-1
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
6-2
Using LEAP or EAP-FAST, see below
Using EAP-TLS, page 6-5
Using PEAP, page 6-6
Wireless Login Module Screen
Chapter 6
Chapter 9 for explanations and
Figure 6-1).
Using EAP Authentication
OL-1375-04