Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual page 112

Error Messages
Error Message File not valid for this radio! Firmware Upgrade Failed!
Explanation
selected. The firmware file should have a .img extension.
Recommended Action
Error Message An internal error has occurred.
Explanation
Recommended Action
Error Message This name already exists. Please use a different name.
Explanation
Recommended Action
Error Message No profiles found. (Use ACU to create a profile.)
Explanation
Recommended Action
Windows CE device.
Error Message Please select one of the profiles.
Explanation
profile was selected.
Recommended Action
for the action you want to take.
Error Message The selected profile does not support EAP. (Use ACU to modify the
security settings.)
Explanation
not have host-based EAP enabled.
Recommended Action
reactivate the Authentication Manager. If necessary, reset the Windows CE device.
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
9-6
Your attempt to upgrade the client adapter firmware failed because an invalid file was
Tap the Browse button and select a new firmware image file.
An error has occurred.
Reset the Windows CE device and try the operation again.
An attempt was made to create or rename a profile using the name of an existing profile.
Tap OK. Then create or rename the profile using a unique name.
Profiles have not been created for your client adapter.
Create a profile in ACU for the client adapter to use. If necessary, reset the
The Edit, Rename, or Delete button on the ACU Profiles screen was tapped before a
Tap OK to acknowledge the message. Then select a profile and tap the button
The Authentication Manager (AuthMgr) was activated although the current profile does
Tap OK twice. Then select a profile in ACU that uses host-based EAP and
Chapter 9 Troubleshooting
OL-1375-04