Configuring the Client Adapter
Figure E-2
Perform one of the following:
Step 8
If you selected an SSID from the list of wireless networks, make sure the SSID appears in the
•
Network name field.
If you selected Add New Settings, enter the case-sensitive SSID of the access point to which you
•
want the client adapter to associate or the name of the ad hoc network in the Network name field.
Check the This is a device-to-computer (ad-hoc) connection check box if you are planning to operate
Step 9
the client adapter in an ad hoc network.
Tap the Authentication tab. The Configure Network Authentication screen appears (see
Step 10
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
E-6
Configure Wireless Network Screen (General Tab)
Appendix E
Configuring the Client Adapter through Windows CE .NET
Figure
E-3).
OL-1375-04