Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual page 53

Chapter 5 Configuring the Client Adapter
Table 5-1
Parameter
Network Security Type
User Name
User Password
User Domain
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-04
Client Adapter Configuration Parameters (continued)
Description
Specifies the type of 802.1X authentication that your client adapter will
use.
Options: None, LEAP, EAP-FAST, or Host Based EAP
Default: None
Network Security Type
None
LEAP
EAP-FAST
Host Based EAP
(PPC 2002 devices only)
If you are planning to use saved LEAP or saved EAP-FAST credentials
rather than entering them in WLM, this parameter specifies the
username that is to be saved and used automatically for authentication.
This parameter is available only if the Network Security Type is set to
LEAP or EAP-FAST.
Note
If you are planning to use saved LEAP or saved EAP-FAST credentials
rather than entering them in WLM, this parameter specifies the
password that is to be saved and used automatically for authentication.
This parameter is available only if the Network Security Type is set to
LEAP or EAP-FAST.
Note
If you are planning to use saved LEAP or saved EAP-FAST credentials
rather than entering them in WLM, this parameter specifies the domain
name (if required) that is to be saved and used automatically for
authentication. This parameter is available only if the Network Security
Type is set to LEAP or EAP-FAST.
Note
Description
Disables 802.1X authentication for your
client adapter.
Specifies that your client adapter use
LEAP authentication.
Note
Specifies that your client adapter use
EAP-FAST authentication.
Note
Specifies that your client adapter use any
802.1X authentication type for which your
operating system has support (such as
EAP-TLS or PEAP).
Note
Go to Step 3 for instructions on entering the LEAP or
EAP-FAST username.
Go to Step 3 for instructions on entering the LEAP or
EAP-FAST password.
Go to Step 3 for instructions on entering the LEAP or
EAP-FAST domain name.
Configuring Your Client Adapter
Go to Step 3 for instructions on
enabling LEAP.
Go to Step 3 for instructions on
enabling EAP-FAST.
Go to Step 3 for instructions on
enabling host-based EAP.
5-9