Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual page 115

Chapter 9 Troubleshooting
Error Message First Authentication Attempt Timed Out. Radio Will Continue Trying.
Explanation
range of an access point. The client adapter continues trying to authenticate.
Recommended Action
of the following: 1) move the Windows CE device closer to an access point so that WLM will
continue trying to authenticate or 2) enter a different saved or temporary LEAP username and
password.
Error Message Incorrect Login -- Please Re-Enter
Explanation
screen or was not valid for the RADIUS server on the network.
Recommended Action
Error Message LEAP or EAP-FAST Not Enabled on the Cisco Wireless LAN Adapter! Start
ACU and Enable LEAP or EAP-FAST First.
Explanation
Recommended Action
LEAP in ACU. WLM restarts automatically, provided you are using a temporary LEAP username and
password.
Error Message Must set a User Name
Explanation
entered. The password is an optional entry, but if a password is entered, a username must also be
entered.
Recommended Action
User Name field on the Wireless Login Module screen and tap OK.
Error Message Name and Domain length is greater than the maximum allowable size of
xx.
Explanation
Wireless Login Module screen exceeds the maximum number supported by LEAP, which is 64.
Recommended Action
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-04
The client adapter timed out while trying to authenticate, possibly because it is out of
Tap OK to acknowledge the message and terminate WLM. Then perform one
The LEAP username or password was entered incorrectly in the Wireless Login Module
Re-enter the LEAP username and password and tap OK.
An attempt was made to start WLM before LEAP was enabled on the client adapter.
Tap OK to acknowledge the message and terminate the utility. Then enable
A password was entered in the Wireless Login Module screen, but a username was not
Tap OK to acknowledge the message. Then enter your LEAP username in the
The combination of characters entered for the LEAP username and domain name in the
Enter a username and domain name with fewer characters.
Error Messages
9-9