Associating To An Access Point Using Windows Ce .Net - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Associating to an Access Point Using Windows CE .NET

Make sure that the name of the certificate authority from which the server certificate was downloaded
Step 6
appears in the Trusted root certificate field. If necessary, tap the arrow on the drop-down box and select
the appropriate name.
Note
Check the Connect only if server is signed by specified trusted root CA check box if you want to
Step 7
ensure that the certificate server uses the trusted root certificate specified in the field above. This
prevents the client from establishing connections to rogue access points.
Step 8 Tap OK on each open screen to save your settings. The configuration is complete. The client adapter
automatically attempts to associate to the network(s) in the order in which they are listed. When the
client adapter is associated to an access point, the word Connected appears to the right of the network
name in the list of wireless networks.
Refer to the
Step 9
Associating to an Access Point Using Windows CE .NET
Windows CE .NET causes the client adapter's driver to automatically attempt to associate to the first
network in the list of wireless networks (see
association, it automatically switches to the next network in the list of wireless networks. The adapter
does not switch networks as long as it remains associated to the access point. To force the client adapter
to associate to a different access point, you must select a different network from the list of available
networks and tap OK.
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
E-10
If you leave this field blank, you are prompted to accept a connection to the root certification
authority during the authentication process.
"Using PEAP" section on page 6-6
Appendix E Configuring the Client Adapter through Windows CE .NET
for instructions on authenticating using PEAP.
Figure E-1). If the adapter fails to associate or loses
OL-1375-04