Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual page 118

Error Messages
Error Message The file is not a valid PAC file: <filename>.
Explanation
Recommended Action
file from your system administrator and import it.
Error Message Insufficient memory or other system error.
Explanation
completed.
Recommended Action
PAC file from your system administrator and import it.
Error Message An internal error occurred.
Explanation
completed.
Recommended Action
PAC file from your system administrator and import it.
Error Message Invalid PAC found for one or more authorities listed in the local PAC
database.
Explanation
more PAC files could not be read successfully.
Recommended Action
Error Message LEAP or EAP-FAST Not Enabled on the Cisco Wireless LAN Adapter! Start
ACU and Enable LEAP or EAP-FAST First.
Explanation
Recommended Action
EAP-FAST in ACU. WLM restarts automatically, provided you are using a temporary EAP-FAST
username and password.
Error Message Must set a User Name
Explanation
entered. The password is an optional entry, but if a password is entered, a username must also be
entered.
Recommended Action
the User Name field on the Wireless Login Module screen and tap OK.
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
9-12
The PAC file that you tried to import has an incorrect format or cannot be decrypted.
Try again to import the PAC file. If the same message appears, obtain a new PAC
An error occurred while a PAC file was being imported. The operation was not
Try again to import the PAC file. If the same message appears, obtain a new
An error occurred while a PAC file was being imported. The operation was not
Try again to import the PAC file. If the same message appears, obtain a new
An error occurred while the PAC authority drop-down list was being initialized. One or
Obtain new PAC files from your system administrator and import them.
An attempt was made to start WLM before EAP-FAST was enabled on the client adapter.
Tap OK to acknowledge the message and terminate the utility. Then enable
A password was entered in the Wireless Login Module screen, but a username was not
Tap OK to acknowledge the message. Then enter your EAP-FAST username in
Chapter 9 Troubleshooting
OL-1375-04