Configuring The Client Adapter - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Appendix E Configuring the Client Adapter through Windows CE .NET

Configuring the Client Adapter

Follow these steps to configure your client adapter using Windows CE .NET.
Make sure the client adapter is inserted in the Windows CE .NET device.
Step 1
Double-tap the ACU icon on your desktop or select Start > Programs > Cisco > ACU.
Step 2
On the Profiles screen, select <External Settings> from the Select Active Profile drop-down menu.
Step 3
When prompted, tap OK. Then reset your Windows CE .NET device or eject and reinsert the client
Step 4
adapter.
Tap OK to save your settings.
Step 5
Select Start > Settings > the Connections tab > Connections > the Advanced tab > Network Card.
Step 6
The Configure Wireless Networks screen (Wireless tab) appears (see
Figure E-1
Tap the SSID of the access point to which you want the client adapter to associate from the list of
Step 7
wireless networks. If the SSID of the access point you want to use is not listed or you are planning to
operate the client adapter in an ad hoc network (a computer-to-computer network without access points),
tap Add New Settings.
The Configure Wireless Network screen (General tab) appears (see
OL-1375-04
Configure Wireless Networks Screen (Wireless Tab)
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
Configuring the Client Adapter
Figure E-1).
Figure E-2).
E-5