Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual page 34

Installing the Driver and Client Utilities
If you are using a PPC 2002 device, the Install 802.1X Support screen appears. If you are planning to
Step 14
use EAP-TLS or PEAP authentication, click Yes. Otherwise, click No.
Note
If you are using a PPC 2002, PPC 2003, or Windows CE .NET 4.2 device, the Cisco PEAP screen
Step 15
appears. If you are planning to use Cisco PEAP authentication, make sure the Install Cisco PEAP
Support check box is checked and click Next. Otherwise, uncheck the Install Cisco PEAP Support
check box and click Next.
Note
If you installed the 802.1X backport on a PPC 2002 device, a message appears indicating that you must
Step 16
reset your device when the installation is complete. Click OK.
If you are not using a PPC 2002 device, the Cisco Aironet Wireless LAN Adapter Setup screen appears.
Step 17
Click Next to start the Windows CE Application Manager (CeAppMgr), which is installed with
ActiveSync. CeAppMgr interrogates the Windows CE device to determine its platform type.
Note
When the Installing Applications dialog box appears asking if you want to install the client adapter using
Step 18
the default application installation directory, click Yes. The default directory is \Windows\Start
Menu\Programs\Cisco on PPC devices and \Windows\Programs\Cisco on HPC and Windows CE .NET
devices.
A message and a progress bar appear indicating that the client adapter (and 802.1X backport if you are
using a PPC 2002 device) is being installed.
The driver and help files are copied to the \Windows directory, and the client utilities are installed in the
\Windows\Start Menu\Programs\Cisco directory on PPC devices or the \Windows\Programs\Cisco
directory on HPC and Windows CE .NET devices. Shortcuts to ACU and WLM are automatically added
to the desktop on HPC and Windows CE .NET devices.
Step 19 When the installation process is complete on the laptop or PC, a message appears asking you to view the
screen of the Windows CE device to see if any additional steps are required to complete the installation.
Click OK to terminate the installation process on the laptop or PC.
Step 20 Complete any required steps on the Windows CE device.
Step 21 Disconnect the Windows CE device.
If you are using a PPC 2002 device and you installed the 802.1X backport, reset your Windows CE
Step 22
device now. (You should have been notified earlier that a reset would be required after installation.)
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
3-4
If you choose Yes, the PPC 2002 802.1X backport, which provides support for 802.1X
security, is installed. The backport then becomes part of the base Windows CE operating
system and cannot be uninstalled.
If you install the Cisco PEAP supplicant and later want to use the Microsoft PEAP
supplicant, you must default your Windows CE device and reinstall the client adapter
software.
If a Windows CE device is not connected to the laptop or PC (as instructed in
Exit to quit the setup program and connect a Windows CE device or click Next to continue
the installation. If you choose Exit, click OK to shut down CeAppMgr and start again
beginning with Step 1. If you choose Next, a message appears indicating that the software
will be downloaded the next time a mobile device is connected. Click OK. The next time a
Windows CE device is connected to the laptop or PC via ActiveSync, CeAppMgr starts
automatically, and you are prompted to install the software.
Chapter 3 Installing the Client Adapter
Step 1), click
OL-1375-04