Configuring The Client Adapter; Basic Configuration On Mac Os 9.X - Cisco AIR-PCM340 Installation And Configuration Manual

Aironet wireless lan adapters
Table of Contents

Advertisement

Configuring the Client Adapter

Do not force or rock the adapter into the expansion slot as this could damage the adapter and the slot.
Caution
If the adapter does not insert easily, remove the adapter and reinsert it.
Replace the computer cover.
Step 7
Attach the 2-dBi antenna to the adapter's antenna connector until it is finger-tight. Do not overtighten.
Step 8
For optimal reception, position the antenna so it is straight up.
Step 9
Step 10
Boot up your computer.
Step 11
Perform one of the following operations:
a.
b.
Note

Configuring the Client Adapter

This section describes the client adapter's configuration process for Mac OS 9.x and Mac OS X operating
systems.

Basic Configuration on Mac OS 9.x

Click the apple-shaped icon in the top left corner of the desktop.
Step 1
Step 2
Select Control Panels > AppleTalk. The AppleTalk window appears.
Step 3
Make sure the name of the correct wireless LAN adapter appears in the Connect via dialog box. If it does
not, click the up or down arrow on the right side of the Connect via dialog box and select the correct
adapter.
Step 4
Close the AppleTalk window.
Step 5
If a window appears asking if you want to save changes to the current configuration, click the Save
button.
Step 6
Click the apple-shaped icon in the top left corner of the desktop.
Step 7
Select Control Panels > TCP/IP. The TCP/IP window appears.
Step 8
Select Cisco Wireless LAN Adapter in the Connect via drop-down box.
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
3-10
If you are using the Mac OS 9.x operating system, go to the
section on page
3-11.
If you are using the Mac OS X operating system, go to the
software for the Mac OS 9.x and Mac OS X operating systems, follow these steps:" section on
page
3-2.
Instructions are provided in the
you ever need to remove your PCI client adapter.
Chapter 3
Installing the Driver, Client Utility, and Client Adapter
"Configuring the Client Adapter"
"To install the driver and client utility
"Removing a PCI Client Adapter" section on page 8-7
in case
OL-1377-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

340 series350 series

Table of Contents