Cisco CP-7911G-CH1 System Administrator Manual page 56

Unified sccp and sip srst
Table of Contents

Advertisement

Information About New Features in Cisco Unified SRST
European Date Formats
The date format on Cisco IP phone displays can be configured with the following two additional formats:
For configuration information, see the
on page
Huntstop for Dual-Line Mode
A new keyword was added to the huntstop command. The channel keyword causes hunting to skip the
secondary channel in dual-line configuration if the primary line is busy or does not answer.
For configuration information, see the
page
Music-on-Hold for Multicast from Flash Files
Cisco SRST can be configured to support continuous multicast output of MOH from a flash MOH file
in flash memory.
For more information, see the
Ringing Timeout Default
A ringing timeout default can be configured for extensions on which no-answer call forwarding has not
been enabled. Expiration of the timeout causes incoming calls to return a disconnect code to the caller.
This mechanism provides protection against hung calls for inbound calls received over interfaces such
as Foreign Exchange Office (FXO) that do not have forward-disconnect supervision. For more
information, see the
Secondary Dial Tone
A secondary dial tone is available for Cisco Unified IP Phones running Cisco SRST. The secondary dial
tone is generated when a user dials a predefined PSTN access prefix. An example would be the different
dial tone heard when a designated number is pressed to reach an outside line.
The secondary dial tone is created through the secondary dialtone command. For more information, see
the
Enhancement to the show ephone Command
The show ephone command is enhanced to display the following:
For more information, see the show ephone command in
SRST Command Reference (All
Cisco Unified SCCP and SIP SRST System Administrator Guide
56
yy-mm-dd (year-month-day)
yy-dd-mm (year-day-month)
90.
144.
"Configuring the Ringing Timeout Default" section on page
"Configuring a Secondary Dial Tone" section on page
Configuration and status of additional phones (new keywords: 7905, 7914, 7935, ATA)
Status of all phones with the call-forwarding all (CFA) feature enabled on at least one of their DNs
(new keyword: cfa)
Cisco Unified Survivable Remote Site Telephony Feature Roadmap
"Configuring IP Phone Clock, Date, and Time Formats" section
"Configuring Dial-Peer and Channel Hunting" section on
"Defining XML API Schema" section on page
Versions).
176.
146.
95.
Cisco Unified SRST and Cisco Unified SIP
OL-13143-04

Advertisement

Table of Contents
loading

Table of Contents