Cisco CP-7911G-CH1 System Administrator Manual page 116

How to Configure the SIP Registrar
DETAILED STEPS
Command or Action
Step 1
debug voice register errors
Example:
Router# debug voice register errors
*Apr 22 11:52:54.523 PDT: VOICE_REG_POOL: Contact
doesn't match any pools
*Apr 22 11:52:54.539 PDT: VOICE_REG_POOL: Register
request for (33015) from (10.2.152.39)
*Apr 22 11:52:54.539 PDT: VOICE_REG_POOL: Contact
doesn't match any pools.
*Apr 22 11:52:54.559 PDT: VOICE_REG_POOL: Register
request for (33017) from (10.2.152.39)
*Apr 22 11:53:04.559 PDT: VOICE_REG_POOL: Maximum
registration threshold for pool(3) hit
Step 2
debug voice register events
Example:
Router# debug voice register events
Apr 22 10:50:21.731 PDT: VOICE_REG_POOL: Contact
matches pool 1
Apr 22 10:50:21.731 PDT: VOICE_REG_POOL: key(91011)
contact(192.168.0.2) add to contact table
Apr 22 10:50:21.731 PDT: VOICE_REG_POOL: key(91011)
exists in contact table
Apr 22 10:50:21.731 PDT: VOICE_REG_POOL:
contact(192.168.0.2) exists in contact table, ref
updated
Apr 22 10:50:21.731 PDT: VOICE_REG_POOL: Created
dial-peer entry of type 1
Apr 22 10:50:21.731 PDT: VOICE_REG_POOL:
Registration successful for 91011, registration id
is 257
Step 3
show sip-ua status registrar
Example:
Router# show sip-ua status registrar
Line destination
======= ===========
91021 192.168.0.3
91011 192.168.0.2
95021 10.2.161.50
95012 10.2.161.50
95011 10.2.161.50
95500 10.2.161.50
94011 10.2.161.40
94500 10.2.161.40
Cisco Unified SCCP and SIP SRST System Administrator Guide
116
expires(sec) contact
============ =======
227 192.168.0.3
176 192.168.0.2
419 10.2.161.50
419 10.2.161.50
420 10.2.161.50
420 10.2.161.50
128 10.2.161.40
129 10.2.161.40
Setting Up Cisco Unified IP Phones using SIP
Purpose
Use this command to debug errors that happen
during registration.
If there are no voice register pools configured for a
particular registration request, the message "Contact
doesn't match any pools" is displayed.
Using the debug voice register events command
should suffice to display registration activity.
Registration activity includes matching of pools,
registration creation, and automatic creation of dial
peers. For more details and error conditions, you can
use the debug voice register errors command.
The phone number 91011 registered successfully,
and type 1 is reported, which means there is a
pre-existing VoIP dial peer.
Use this command to display all the SIP endpoints
currently registered with the contact address.
OL-13143-04