Cisco CP-7911G-CH1 System Administrator Manual page 248

How to Integrate Voice Mail with Cisco Unified SCCP and SIP SRST
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
DETAILED STEPS
Command
Step 1
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Step 2
mwi relay
Example:
Router(config-cm-fallback)# mwi relay
Step 3
mwi reg-e164
Example:
Router(config-cm-fallback)# mwi reg-e164
Step 4
exit
Example:
Router(config-cm-fallback)# exit
Step 5
sip-ua
Example:
Router(config)# sip-ua
Cisco Unified SCCP and SIP SRST System Administrator Guide
248
call-manager-fallback
mwi relay
mwi reg-e164
exit
sip-ua
mwi-server {ipv4:destination-address | dns:host-name} [expires seconds] [port port]
[transport {tcp | udp}] [unsolicited]
exit
Integrating Voice Mail with Cisco Unified SRST
Purpose
Enters call-manager-fallback configuration mode.
Enables the SCCP SRST router to relay MWI
information to remote Cisco IP phones.
Registers E.164 numbers rather than extension
numbers with a SIP proxy or registrar.
Exits call-manager-fallback configuration mode.
Enters SIP user-agent configuration mode.
OL-13143-04