Monitoring and Maintaining Cisco Unified SRST
Revised: February 3, 2011
To monitor and maintain Cisco Unified Survivable Remote Site Telephony (SRST), use the following
commands in privileged EXEC mode.
Command
Router# show call-manager-fallback all
Router# show call-manager-fallback dial-peer
Router# show call-manager-fallback ephone-dn
Router# show call-manager-fallback voice-port
Router# show dial-peer voice summary
Router# show ephone phone
Router# show ephone offhook
Router# show ephone registered
Router# show ephone remote
Router# show ephone ringing
Router# show ephone summary
Router# show ephone telephone-number phone-number
Router# show ephone unregistered
Router# show ephone-dn tag
Router# show ephone-dn summary
Router# show ephone-dn loopback
OL-13143-04
Purpose
Displays the detailed configuration of all the
Cisco Unified IP phones, voice ports, and dial peers of the
Cisco Unified SRST Router.
Displays the output of the dial peers of the
Cisco Unified SRST Router.
Displays Cisco Unified IP Phone destination numbers when in
call manager fallback mode.
Displays output for the voice ports.
Displays a summary of all voice dial peers.
Displays Cisco Unified IP Phone status.
Displays Cisco Unified IP Phone status for all phones that are
off hook.
Displays Cisco Unified IP Phone status for all phones that are
currently registered.
Displays Cisco Unified IP Phone status for all nonlocal phones
(phones that have no Address Resolution Protocol [ARP] entry).
Displays Cisco Unified IP Phone status for all phones that are
ringing.
Displays a summary of all Cisco Unified IP Phones.
Displays Unified IP Phone status for a specific phone number.
Displays Unified IP Phone status for all unregistered phones.
Displays Unified IP Phone destination numbers.
Displays a summary of all Cisco Unified IP Phone destination
numbers.
Displays Cisco Unified IP Phone destination numbers in
loopback mode.
Cisco Unified SCCP and SIP SRST System Administrator Guide
271