Setting Up Cisco Unified IP Phones using SCCP
Command or Action
Step 4
max-dn max-no-of-directories [dual-line |
octo-line]
Example:
Router(config-cm-fallback)# max-dn 10 octo-line
Step 5
timeouts busy seconds
Example:
Router(config-cm-fallback)# timeouts busy 10
Step 6
end
Example:
Router(config-cm-fallback)# end
OL-13143-04
Purpose
Sets the maximum possible number of directory numbers or
virtual voice ports that can be supported by a router and
enables dual-line mode, octo-line mode, or both modes.
max-no-of-directories—Maximum number of directory
•
numbers or virtual voice ports supported by the router.
The maximum possible number is platform-dependent.
The default is 0 directory numbers and 1 channel per
virtual port.
•
dual-line—(Optional) Sets all Cisco Unified IP phones
connected to a Cisco Unified SRST router to one virtual
voice port with two channels.
octo-line—(Optional) Sets all Cisco Unified IP phones
•
connected to a Cisco Unified SRST router to one virtual
voice port with eight channels.
Sets the timeout value for call transfers to busy destinations.
seconds—Number of seconds after connection to a
•
busy destination before a transferred call is
disconnected. Range is 0 to 30. Default: 10.
Exits configuration mode and enters privileged EXEC
mode.
Cisco Unified SCCP and SIP SRST System Administrator Guide
How to Set Up Cisco Unified IP Phones
101