Verifying Cisco Unified Srst - Cisco CP-7911G-CH1 System Administrator Manual

How to Set Video Parameters for Cisco Unified SRST
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
voice service voip
Example:
Router(config)# voice service voip
Step 4
h323
Example:
Router(config-voi-serv)# h323
Step 5
call start slow
Example:
Router(config-serv-h323)# call start slow

Verifying Cisco Unified SRST

Use the following procedure to verify that the Cisco Unified SRST feature is enabled and to verify
Cisco Unified IP phone configuration settings.
SUMMARY STEPS
1.
2.
3.
Cisco Unified SCCP and SIP SRST System Administrator Guide
262
enable
show running config
show call-manager-fallback all
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Enters voice-service configuration mode.
Enters H.323 voice-service configuration mode.
Forces an H.323 gateway to use slow-connect procedures
for all VoIP calls.
Setting Video Parameters
OL-13143-04