Cisco CP-7911G-CH1 System Administrator Manual page 165

Configuring Call Handling
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
voice register global tag
Example:
Router(config)# voice register global 12
Step 4
max-pool max-voice-register-pools
Example:
Router(config-register-global)# max-pool 10
Step 5
application application-name
Example:
Router(config-register-global)# application
global_app
Step 6
external-ring {bellcore-dr1 | bellcore-dr2 |
bellcore-dr3 | bellcore-dr4 | bellcore-dr5}
Example:
Router(config-register-global)# external-ring
bellcore-dr1
Step 7
exit
Example:
Router(config-register-global)# exit
Step 8
voice register pool tag
Example:
Router(config)# voice register pool 20
OL-13143-04
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Enters voice register global configuration mode to set
global parameters for all supported Cisco SIP IP phones in
a Cisco Unified SIP SRST environment.
Sets the maximum number of SIP voice register pools that
are supported in a Cisco Unified SIP SRST environment.
The max-voice-register-pools argument represents the
maximum number of SIP voice register pools supported by
the Cisco Unified SIP SRST router. The upper limit of voice
register pools is version- and platform-dependent; see
Cisco IOS command-line interface (CLI) help. Default is 0.
Selects the session-level application for all dial peers
associated with SIP phones. Use the application-name
argument to define a specific interactive voice response
(IVR) application.
Specifies the type of ring sound used on Cisco SIP or
Cisco SCCP IP phones for external calls. Each bellcore-dr
1-5 keyword supports standard distinctive ringing patterns
as defined in the standard GR-506-CORE, LSSGR:
Signaling for Analog Interfaces.
Exits voice register global configuration mode.
Enters voice register pool configuration mode for SIP
phones.
Use this command to control which phone registrations
•
are to be accepted or rejected by a Cisco Unified SIP
SRST device.
Cisco Unified SCCP and SIP SRST System Administrator Guide
How to Configure Cisco Unified SIP SRST
165