Defining Xml Api Schema; Where To Go Next - Cisco CP-7911G-CH1 System Administrator Manual

Where to Go Next

Defining XML API Schema

The Cisco IOS commands in this section allow you to specify parameters associated with the XML API.
For more information, see
Unified SRST for MOH from a Live Feed" section on page 306
SUMMARY STEPS
1.
2.
3.
DETAILED STEPS
Command or Action
Step 1
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Step 2
xmlschema schema-url
Example:
Router(config-cm-fallback)# xmlschema
http://server2.example.com/
schema/schema1.xsd
Step 3
exit
Example:
Router(config-cm-fallback)# exit
Where to Go Next
If you need to configure security, see the
page
SRST" section on page
Parameters" section on page
Maintaining Cisco Unified SRST" section on page
For additional information, see the
SCCP and SIP SRST Feature
Cisco Unified SCCP and SIP SRST System Administrator Guide
176
XML Provisioning Guide for Cisco
call-manager-fallback
xmlschema schema-url
exit
177, or if you need to configure voicemail, see the
235. If you need to configure video parameters, see the
257. If you do not need any of those features, go to the
Overview"chapter.
Purpose
Enters call-manager-fallback configuration mode.
Specifies the URL for an XML API schema to be used with
this Cisco Unified SRST system.
schema-url: Local or remote URL as defined in
•
RFC 2396.
Exits call-manager-fallback configuration mode.
"Configuring Secure SRST for SCCP and SIP" section on
"Integrating Voice Mail with Cisco Unified
271.
"Additional References" section on page 230
Configuring Call Handling
CME/SRST. See the "Configuring Cisco
for configuration instructions.
"Setting Video
"Monitoring and
in the "Cisco Unified
OL-13143-04