Analog Modem Wic Leds - Cisco 1601 - Router - EN Hardware Installation Manual

Analog Modem WAN Interface Cards
WIC-1AM and WIC-2AM Features
The WIC-1AM and WIC-2AM interface cards support the following protocols:
•
•
•
•
•
•
WIC-1AM-V2 and WIC-2AM-V2 Features
You can upgrade WIC-1AM-V2 and WIC-2AM-V2 WAN interface card modem firmware, if a new
image is released. For more information about configuring the WIC-1AM-V2 and WIC-2AM-V2
interface cards, and upgrading the modem firmware, see the
Analog Modem WAN Interface Card
The WIC-1AM-V2 and WIC-2AM-V2 interface cards support the following protocols:
•
•
•
•
•
•
•
•

Analog Modem WIC LEDs

The analog modem WIC LEDs are shown in
described in
Table 28
LED
SP
CN
OH
All standard data rates from 300 bps to 33.6 kbps (V.34bis)
V.42bis and MNP 5 data compression
V.42, LAPM, and MNP 2 to 4 error correction
V.90 up to 56 kbps
MNP 10 for high performance under all line conditions
MNP 10EC for high performance in analog cellular environments
All standard data rates from 300 bps to 33.6 kbps (V.34bis)
V.42bis and MNP 5 data compression
V.42, LAPM, and MNP 2 to 4 error correction
V.44 for a higher compression ratio over V.42bis compression technology.
V.90 up to 56 kbps
V.92 with quick-connect
MNP 10 for high performance under all line conditions
MNP 10EC for high performance in analog cellular environments
Table 28.
Analog Modem WIC LEDs
Description
Speed indication
On = High speed (V.56/V.90)
•
Off = Low speed (V.32/V.32b/V.34)
•
Connect (carrier detect)
Off-hook status
Cisco WIC-1AM-V2 and WIC-2AM-V2
feature document.
Figure 102 to Figure
Analog Modem WIC LEDs
105. The functions of the LEDs are
OL-12848-01
3