Cisco 1601 - Router - EN Hardware Installation Manual page 45

Installing Cisco Interface Cards in Cisco Access Routers
Installing Slot Dividers in Cisco 2801 and Cisco 3845 Routers
To install a slot divider in Cisco 2801 and Cisco 3845 routers, perform the following steps:
Step 1 Guide the slot divider between the two rails in the bottom of the interface card slot. (See
the slot divider in until it is fully seated. When the slot divider is fully seated, its outer end is flush with
the front panel of the router.
Figure 23
1
1
Tighten the retention screw on the slot divider.
Step 2
Inserting a Slot Divider into an Interface Card Slot on a Cisco 2801 or Cisco 3845
Router
Slot divider
Installing Cisco Interface Cards in Cisco Access Routers
2
2 Slot divider rails
Figure 23.) Push
OL-12842-01
13