Cisco 1601 - Router - EN Hardware Installation Manual page 67

Serial Interface Cards
Interfaces supported are as follows:
•
•
The maximum data rate supported is 8 Mbps per port.
Caution To comply with the Telcordia GR-1089 NEBS standard for electromagnetic compatibility and safety,
connect the 4-port multiprotocol high speed HWIC (HWIC-4T) only to intra-building or non-exposed
wiring or cabling. The intrabuilding cable must be shielded and the shield must be grounded at both ends.
Figure 37
4-Port Multiprotocol Low Speed Asynchronous/Synchronous HWIC
The 4-port multiprotocol low speed asynchronous/synchronous HWIC (HWIC-4A/S) is illustrated in
Figure
Interfaces supported are as follows:
•
•
The maximum data rate supported is 256 kbps per port (synchronous).
To comply with the Telcordia GR-1089 NEBS standard for electromagnetic compatibility and safety,
Caution
connect the 4-port multiprotocol low speed asynchronous/synchronous HWIC (HWIC-4A/S) only to
intra-building or non-exposed wiring or cabling. The intrabuilding cable must be shielded and the shield
must be grounded at both ends.
Figure 38
In both DTE and DCE formats: V35, X21, RS-232, and RS-449
In DTE format only: EIA-530 and EIA-530A
4-Port Multiprotocol HWIC Front Panel (HWIC-4T)
Serial ports Serial ports
S3
S1
CONN HWIC-4T
CONN LED
38. Protocols supported are Async (SLIP), Async (PPP), HDLC, Bisync, and transparent.
In both DTE and DCE formats: V35, X21, RS-232, and RS-449
In DTE format only: EIA-530 and EIA-530A
4-Port Multiprotocol A/S HWIC Front Panel (HWIC-4A/S)
Serial ports Serial ports
S3
S1
CONN HWIC-4A/S
CONN LED
S2
S0
S2
S0
Serial High Speed WICs
OL-12843-01
7