Cisco 1601 - Router - EN Hardware Installation Manual page 155

10/100BASE-T Ethernet Switch High-Speed WAN Interface Cards
Figure 110
HWICD
9ESW
1
1
2
Table 30
LED
LNK
ILP
Installing Inline Power Daughter Cards on Cisco 10/100BASE-T
Ethernet Switch HWICs
This section describes the installation of inline power daughter cards on HWIC-4ESW and
HWIC-D-9ESW Ethernet switch HWICs.
HWICs.
Table 31
HWIC Part Number
HWIC-4ESW
HWIC-D-9ESW
Note The inline power daughter cards are available separately as spares.
The inline power daughter cards are NOT interchangeable between the 4-port and the (8+1)-port HWICs.
Note
HWIC-D-9ESW Faceplate
8x LNK PWR 7x LNK PWR 6x LNK
2 4
3
Product name
Inline power LED
Cisco 10/100BASE-T Ethernet Switch HWIC LEDs
Color Definition States
Green Link
Status
Green/amber Inline
Power
Status
HWIC and Inline Power Card Mapping
Installing Inline Power Daughter Cards on Cisco 10/100BASE-T Ethernet Switch HWICs
PWR 5x LNK PWR 4x LNK PWR 3x LNK
3 Port number
4
Link LED
ON = Link pulses detected
OFF = No link pulses detected
GREEN = Providing power to the device
AMBER BLINKING = Power delivery fault or denial
AMBER = Power administratively disabled
OFF = No external device detected, or inline power option not
installed.
Table 31 shows the inline power card mapping for the two
Inline Power Part Number
ILPM-4
ILPM-8
PWR 2x LNK PWR 1x LNK PWR 0x LNK
OL-12850-01
3