Supported Cisco Radio Antennas - Cisco 1601 - Router - EN Hardware Installation Manual

Access Point High-Speed WAN Interface Cards

Supported Cisco Radio Antennas

Table 40
Table 40 Cisco Antennas Supported on the Single-Mode Access Point HWIC
Cisco Part Number
AIR-ANT4941
AIR-ANT1728
AIR-ANT3549
AIR-ANT5959
lists the Cisco antennas that are supported for use on the single-mode access point HWIC.
Antenna Type Maximum Gain
Omnidirectional 2.2 dBi
Omnidirectional 5.2 dBi
Patch 9 dBi
Diversity 2 dBi
omnidirectional
Access Point High-Speed WAN Interface Cards
Description
This is the default antenna. Swivel-mount dipole
antenna operating in the 2.4-to 2.5-GHz band.
This antenna is designed for use with Cisco
wireless products utilizing an RP-TNC
connector. For more information, see the
Cisco Aironet 2.4 GHz Articulated Dipole
Antenna (AIR-ANT4941) document.
Ceiling-mount antenna operating in the 2.4- to
2.5-GHz band. This antenna has a clip that
allows it to be mounted to a drop-ceiling cross
member. For more information, see the
Cisco Aironet High-Gain Omnidirectional
Ceiling Mount Antenna (AIR-ANT1728)
document.
This antenna is not supported in Japan.
Note
Wall-mount antenna operating in the 2.4- to
2.5-GHz band.
This antenna is not supported in the
Note
United States and Canada.
Ceiling-mount antenna operating in the 2.4- to
2.5-GHz band. This antenna has a clip that
allows it to be mounted to a drop-ceiling cross
member. For more information, see the
Cisco Aironet 2-dBi Diversity Omnidirectional
Ceiling Mount Antenna (AIR-ANT5959)
document.
OL-12854-01
5