Related Documentation - Cisco 1601 - Router - EN Hardware Installation Manual

Voice Interface Cards
Figure 101
VIC-
2CA MA
Straight-through
RJ-11-to-RJ-11 cable
Step 3 Connect the other end of the cable to the telephone wall outlet (RJ-11 port).

Related Documentation

Related documentation is available on Cisco.com or on the Product Documentation DVD. For more
information, see the
on page
Product Information and Supported Hardware and Software
•
•
•
•
•
•
•
•
•
•
•
Connecting the 2-Port CAMA Card
RJ-11 ports
1
SEE MAN UAL BEF ORE INST
0
ALLA TION
"Obtaining Documentation, Obtaining Support, and Security Guidelines" section
21.
Low Density Voice/Fax Network Modules for the Cisco 2600, 3600 and 3700 Series
data sheet
Understanding Direct Inward Dial (DID) Voice Interface
Voice Hardware Compatibility Matrix (Cisco 17xx, 26/36/37xx, VG200, Catalyst 4500/4000,
Catalyst 6xxx), tech note
Cisco 4-Port High-Density FXS/DID Analog Voice Interface Card for the Cisco 1700 Series
Modular Access Routers, data sheet
Digital J1 Packet Voice Network
FXO, FXS, and E&M Voice Interface Card Support on Cisco 1700 Series Routers
Understanding 1-Port and 2-Port E1 Multiflex Trunk Voice/WAN Interface Cards
Cisco Digital 1-port and 2-port T1 Multi-Flex Voice
Cisco T1/E1 Multiflex Voice/WAN Interface Cards for the Cisco 1700 Series Modular Access
Routers, data sheet
Understanding E&M Voice Interface
Analog E&M Voice Signaling
RJ-11 wall jack
Module, data sheet
WICs, tech note
Cards, tech note
Overview, tech note
Related Documentation
Cards, tech note
(VWICs), tech note
OL-12847-01
Routers,
19