Cisco 1601 - Router - EN Hardware Installation Manual page 193

Access Point High-Speed WAN Interface Cards
Revised: 6/7/07, OL-12854-01
Overview
This document describes access point high-speed WAN interface cards (HWICs) and how to connect
access point HWICs to a network, and contains the following sections:
•
•
•
For an overview of Cisco interface cards used for Cisco access routers see the
Cisco Access Routers
Access Point High-Speed WAN Interface Cards
This section describes access point HWICs and contains the following sections:
•
•
•
•
•
The access point HWIC houses one radio (single-mode) or two radios (dual-mode) for connection to a
wireless LAN. There are two access point HWICs:
•
Access Point High-Speed WAN Interface Cards, page 1
Related Documentation, page 9
Obtaining Documentation, Obtaining Support, and Security Guidelines, page 10
document.
Access Point HWIC Limitations
Access Point HWIC Safety Guidelines and Warnings
Access Point HWIC LEDs
Supported Cisco Radio Antennas
Connecting Radio Antennas to the Access Point HWIC
Single-mode access point HWIC with 2.4-GHz radio for 802.11b/g operations. (See
The following are the Cisco part numbers and the geographic regions for which the interface cards
are configured:
HWIC-AP-G-A—North America
–
– HWIC-AP-G-E—Europe
– HWIC-AP-G-J—Japan
Cisco Interface Cards for
Figure 132.)
OL-12854-01
1