Cisco 1601 - Router - EN Hardware Installation Manual page 40

Installing Cisco Interface Cards in Cisco Access Routers
Figure 17
1
Repeat for every empty interface card slot.
Step 3
Continue with hardware installation tasks.
Step 4
Removing Blank Faceplates
To remove blank faceplates, perform the following steps:
Using either a number 1 Phillips screwdriver or a small flat-blade screwdriver, unscrew the captive
Step 1
screws and remove the blank faceplate from the chassis slot you plan to use. (See
Figure 18
1
Save blank faceplates for future use.
Tip
Continue with hardware installation tasks.
Step 2
OL-12842-01
8
Installing a Blank Interface Card Faceplate
1
Blank interface card faceplate
Removing a Blank Interface Card Faceplate
1
Blank interface card faceplate
Installing Cisco Interface Cards in Cisco Access Routers
Figure 18.)