Prepare For Installation; Safety Recommendations And Warnings - Cisco Catalyst 8300 Series Hardware Installation Manual

Prepare for Installation

•
•
•
•
•
•
•
•

Safety Recommendations and Warnings

Review the safety warnings listed in the
8300 Series Edge uCPE
Read the following safety guidelines before you install this product:
Warning
Warning
Safety Recommendations and Warnings, on page 9
Network Equipment-Building System (NEBS) Statements, on page 10
General Safety Guidelines For Electrical Equipment, on page 11
Site Requirements, on page 12
Mounting Requirements, on page 13
Power Guidelines and Requirements, on page 13
Network Cabling Specification, on page 14
Required Tools and Equipment, on page 14
before installing, configuring, or maintaining the device.
Statement 1071 Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Read the installation instructions before using, installing, or
connecting the system to the power source. Use the statement number at the beginning of each warning
statement to locate its translation in the translated safety warnings for this device.
SAVE THESE INSTRUCTIONS
Statement 1074 Comply with Local and National Electrical Codes
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes.
C H A P T E R
Regulatory Compliance and Safety Information for the Cisco Catalyst
Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide
2
9