Prepare For Installation; Safety Recommendations And Warnings - Cisco Catalyst 8300 Series Hardware Installation Manual

Prepare for Installation

•
•
•
•
•
•
•

Safety Recommendations and Warnings

Review the safety warnings listed in Regulatory Compliance and Safety Information for the Cisco Catalyst
8300 Series Edge uCPE before installing, configuring, or maintaining the device.
Read the following safety guidelines before you install this product:
Warning
Warning
Warning
Always follow these electrostatic discharge (ESD) prevention procedures when removing and replacing
modules:
• Ensure that the chassis is electrically connected toground.
Safety Recommendations and Warnings, on page 9
Safety with Electricity, on page 10
Site Requirements, on page 11
Mounting Requirements, on page 11
Power Guidelines and Requirements, on page 12
Network Cabling Specification, on page 12
Required Tools and Equipment, on page 13
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device. Statement 1071
Ultimate disposal of this product should be handled according to all national laws and regulations. Statement
9001
Installation of the equipment must comply with local and national electrical codes. Statement 1074
C H A P T E R
Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide
2
9