Prepare For Installation; Installation Warnings - Cisco ASA 5506-X Hardware Installation Manual

Prepare for Installation

This chapter prepares you to install your ASA, and contains the following topics:
•
•
•
•

Installation Warnings

Be sure to read the Regulatory Compliance and Safety Information document
asa5506x-compliance) before installing the ASA.
Take note of the following warnings:
Installation Instructions Warning
Read all installation instructions before connecting the system to a power source. (Statement 1004)
Power Supply Disconnection Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect
the power at the circuit breaker on DC units. (Statement 12)
Jewelry Removal Warning
Before working on equipment that is connected to a power source, remove jewelry (including rings, necklaces,
and watches). Metal objects will heat when connected to power and ground, and can cause serious burns or
weld the metal object to the terminals. (Statement 43)
Wrist Strap Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch
the backplane with your hand or any metal tool, or you could receive a shock. (Statement 94)
Work During Lightning Warning
Do not work on the system, or connect or disconnect cables during periods of lightning. (Statement 1001)
Short-Circuit Protection Warning
Online Only
Installation Warnings, page 9
Position the ASA, page 10
Safety Recommendations, page 11
Site Environment , page 12
2
C H A P T E R
(http://www.cisco.com/go/
Cisco ASA 5506-X Hardware Installation Guide
9