Network Cabling Specification; Required Tools And Equipment - Cisco Catalyst 8300 Series Hardware Installation Manual

Network Cabling Specification

Note
Warning
Network Cabling Specification
• Ethernet cables for RJ45 ports
• Serial or console cables used to connect devices like routers
• Shielded USB cables with properly terminated shields for the USB port

Required Tools and Equipment

Have the following equipments available to install the uCPE 8300 device and its equipment:
• ESD-preventive cord and wrist strap
• Phillips screwdrivers: small, 3/16-in. (4 to 5 mm), and medium, 1/4-in. (6 to 7mm)
• Screws that fit your rack
• Wire crimper for chassis grounding - to be used along with the ground lug kit
• One 14 AWG cable for the ground lug kit
Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide
14
Statement 407 Japanese Safety Instruction
You are strongly advised to read the safety instruction before using the product.
https://www.cisco.com/web/JP/techdoc/pldoc/pldoc.html
When installing the product, use the provided or designated connection cables/power cables/AC adapters.
Statement 1028 More Than One Power Supply
This unit might have more than one power supply connection. To reduce risk of electric shock, remove all
connections to de-energize the unit.
Prepare for Installation