Prepare For Installation; General Precautions - Cisco 8011-2X2XP4L Hardware Installation Manual

Prepare for Installation

Before you install the router, you must prepare your site for installation.
Preparing your site involves the following tasks:
•
•
•
•
•
•
•
•
•
•
•
•

General Precautions

Observe the following general precautions when using and working with your router:
• Keep your system components away from radiators and heat sources, and do not block cooling vents.
• Do not spill food or liquids on your system components, and never operate the product in a wet
• Do not push any objects into the openings of your system components. Doing so can cause fire or electric
• Position system cables and power supply cable carefully. Route system cables, the power supply cable,
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site
• If you turn off your system, wait at least 30 seconds before turning it on again to avoid damage to the
General Precautions, on page 15
Site Planning Checklist, on page 16
Environmental Requirements, on page 16
Airflow Guidelines, on page 16
Site Power Guidelines, on page 18
Site Cabling Guidelines, on page 19
Tools and Equipment, on page 20
Prepare Your Location , on page 21
Prepare Yourself , on page 21
Prepare Rack for Router Installation, on page 22
Cabinet Selection Guidelines, on page 22
Unpack the Cisco 8011 Router, on page 23
environment.
shock by shorting out interior components.
and plug so that they are not stepped on or tripped over. Be sure that nothing else rests on your system
component cables or power cable.
modifications. Always follow your local and national wiring rules.
system components.
Hardware Installation Guide for Cisco 8011-2X2XP4L PLE Service Endpoint Router
3
C H A P T E R
15