Table of Contents
Advertisement
™
Carestation
620/650/650c (A1)
3-10
1.
Select Start Case.
The Case Defaults selection shows the first preset case type.
Ideal Weight, Age, CO2 Alarms, and Volume Apnea Alarm
show the default settings that correspond to the case type
shown.
2.
Change Ideal Weight, Age, or Volume Apnea Alarm settings
on the menu.
The Case Defaults changes from the case name to Preset.
If the CO2 Alarms setting on the menu is changed, the Case
Defaults remains as previously selected.
3.
To change ventilation mode, select Mode. Make the change. To
change the ventilation settings, select a ventilator quick key or
More Settings. Make the change.
4.
To change alarm settings, select Alarm Setup. Make the
change.
5.
From the Start Case menu, select Start Case Now. Start gas
flow by turning on the gas flow knobs.
See the "Ventilator setup" section for information on the Vent Mode
menu.
See the "Alarm setup" section for information on the Alarm Setup
menu.
2076152-001
Advertisement
Table of Contents
