Default Case Type Settings - GE Carestation 620 User's Reference Manual

Default case type settings

Page 1 Default settings for default case types
Settings ADULT
Name ADULT
Patient and Sensor Adult
Ideal Weight 70
Age 40
Data Source Vent
Auto MV Limits Off
Alarm Volume 3
MV/TV Alarms On
Volume Apnea On
Page 2 Default settings for default case types
Settings ADULT
Vent Mode VCV
TV 500
RR 12
Minimum RR 12
2076152-001
2. Select Volume Apnea Setup.
3. Set Volume Apnea Selection to Enable or Disable.
Set to Enable to allow the user to turn the volume apnea alarm
on or off from the Start Case menu.
Set to Disable to set the volume apnea alarms as always on
during manual ventilation.
4. Set the Volume Apnea for each case default.
5. Select Back to return to the Case Defaults menu.
Note When the Volume Apnea Selection is set to Disable, the Volume
Apnea Alarm menu selection does not show on the user's Start
Case menu and the Vol Apnea Alarm selection does not show on
the Alarm Setup menu.
Each case has multiple settings. The default settings for the default
case types are shown in the following table. An * indicates that the
setting is not used for the default ventilation mode in the case type.
Use the empty columns to write in facility changes.
Note VCV ADULT settings are used as the default if the system does not
have an optional ventilation mode shown.
.
PEDIATRIC
PEDIATRIC
Pedi
18
5
Vent
Off
3
On
On
.
PEDIATRIC
PCV
150
16
16
12 Super user mode
LOCAL CUSTOM 1
LOCAL CUSTOM 1
Adult Adult
70 70
40 40
Vent Vent
Off Off
1 3
On On
On On
LOCAL CUSTOM 1
VCV VCV
500 500
12 12
12 12
12-11