Table of Contents
Advertisement
Attaching equipment to the top of the machine
WARNING
2076152-001
The top of the machine has a weight limit of 25kg (55 lb).
•
Check the stability of the system in its final configuration.
Make sure the weight is evenly distributed throughout the
system.
•
Make sure the plunger pin is locked into the device
interface and the thumb screws are fully tightened. If not
properly fastened, the device may fall.
•
The top shelf patient monitor mount is only for use with
General Electric channel mount adapter interface
monitors.
1.
Align the device interface with the grooves of the top shelf
monitor mount.
2.
Pull down the plunger pin and push the device interface
horizontally along the grooves. Release the plunger and
continue to slide the device until the plunger pin locks into the
device interface.
3.
Tilt the device forward and rotate to ensure device interface is
properly installed in both grooves.
8 Setup and connections
8-27
Advertisement
Table of Contents
