Checking The Operating Status; To Check The Operating Status Using Lci - Cisco Prisma II 1550 nm Installation And Operation Manual

Chapter 4 Operation using LCI

Checking the Operating Status

To Check the Operating Status using LCI

Using the LCI, you can check the status of all operating parameters of this module.
1 In the module tree, right-click the module, and then click Details.
The Module Details window appears as shown below. The monitored
parameters are displayed under Parameters and Status.
Check the operating parameters.
2
Note: For details on all operating status parameters, see Module Parameter
Descriptions (on page 101).
86 78-4019959-01 Rev D