Checking Manufacturing Data Using Lci; To Check Manufacturing Data Using Lci - Cisco Prisma II 1550 nm Installation And Operation Manual

Checking Manufacturing Data using LCI

To Check Manufacturing Data using LCI

Using LCI, you can check the manufacturing data of the module.
1 In the module tree, right-click the module, and then click Details.
The Module Details window appears as shown below. The manufacturing data is
displayed under Properties.
2 Proceed with viewing the manufacturing data.
Note: For details on all manufacturing data parameters, see Module Parameter
Descriptions (on page 101).
78-4019959-01 Rev D

Checking Manufacturing Data using LCI

93