(6) Undo 1 screw (S3) and remove the MCR-PCB-HOLDER.
(7) Release the connector lock and disconnect the FPC ( 1 place).
[ Notes on reassembling ]
When replacing the MCR, perform the following procedure.
(1) Assemble the SPACER-MCR on the MCR.
(2) Stick double-sided tape (MCR-TAPE).
[ NOTE ] Do not cover the hole with the tape.
Screw (S3)
MCR
– 87 –
MCR-PCB-HOLDER
FPC-MCR
IT-9000