5. HARDWARE TEST/SETTING
5-1. General
In this chapter, how to check the hardware of IT-9000 is explained.
The general fl ow to start up the test program is as follows:
Obtain the test program Diag_It9000.zip
Unzip Diag_It9000.zip and copy it to a SD card.
(For both test object IT-9000 and opponent IT-9000)
Copy the test program from the SD card to the FlashDisk.
Delete the test program from the FlashDisk.
Prepare equipment required.
(Download from website.)
Install the SD card.
Prepare equipment required.
Remove the SD card.
Start the test program.
Perform Initial Settings.
Perform function tests.
– 22 –
IT-9000
PC
IT-9000