Casio IT-9000 Series Service Manual page 15

Y Common to all models
Item
Display System
Display Size
No. of Dots
Dot Pitch
Gradation
Display Font
Backlight
View Angle
Touch Panel
Indicator LED
Input Keyboard
Control Keys
Side (Trigger) Keys
Printer Type
Paper width
Print width
Paper thickness
Printing speed
Paper
Roll paper outer diameter
Printable characters
Fonts
Font size
Printing function
Sensors
Dot pitch
Dot size
1 dot line
Blanview TFT (Ortus Technology Co.,Ltd.)
3.7 inch
480 (horizontal) × 620 (vertical) (VGA)
* When an OS is for CE, QVGA is settable.
0.117 mm (vertical) × 0.117 mm (horizontal)
65,536 colors
Scalable font
LED backlight
35° (Left and right), 10° (Up), 50° (Down)
* Contrast: more than 10
Resistive fi lm type analog touch panel (Plastics)
2-color LED × 1, 3-color LED × 1
With key backlight
* Refer to "2-2. Part Names and Functions".
Power, Reset
L, R
Drop-in thermal line dot printer
80 mm/58 mm/82.55 mm
* Paper width is fi xed. To change it, software settings must be
changed.
* When 58 mm width paper is used, installation of paper partition is
required.
* Once paper width is changed to 58 mm, 80/82.55 mm width paper
cannot be used unless the paper width is properly changed by
software.
72 mm (for 80 mm/82.55 mm width paper)
48 mm (for 58 mm width paper)
55 μm ~ 110 μm
Max. speed: Kanji character 28 lines/sec.
* Printing conditions: 1P roll paper is used, battery fully charged, Kanji
characters, 16-dot font, line space 0
1P roll paper, Label paper
* Use the recommended paper.
44 mm
ANK, JIS 1/2 Kanji, Barcode (JAN, UPC-E, NW-7, Code-39, ITF,
Code-128), OCR-B, 128 customized characters
Kanji character:
12 dots 48 digits, 16 dots 36 digits, 24 dots 24 digits
ANK:
12 dots 48 digits, 16 dots 36 digits, 24 dots 24 digits
Free double size character
White and black reversible, Mixed character fonts printable
Printing position alignment
Back side barcode reading
0.125 mm (8 dots/mm)
Vertical 0.22 mm × Horizontal 0.125 mm
0.125 mm
– 8 –
Specifi cations
IT-9000