6-4-6. MCR
(1) Undo 4 screws (S3, S7).
(2) Remove the MCR-U2-CASE.
(3) Disconnect the connector (1 place).
Screws (S7)
(4) Undo 2 screws (S7).
(5) Remove the MCR.
[ NOTE ] The cable is stuck with double-sided tape.
[ NOTE ] After removing the MCR, clean any remaining of double-sided tape.
Screws (S3)
Screws (S7)
– 86 –
IT-9000
Connector
MCR-U2-CASE