Casio IT-9000 Series Service Manual page 65

Special Test
1. Image Scanner Demo (2D type only)
No. Operation
Select "Start" – "Image
Scanner Demo".
Six menu (Scan barcode,
Scan several barcodes,
Capture image, Scan target
barcode, Challenge scanning
speed and Setting) are
1
displayed.
For example, tap "3 Capture
image" and press the "Trigger"
key to capture an image.
2. W-LAN
<Required equipment>
Connect equipment as follow.
[ NOTE ] When testing models of 2nd SD card slot mounting type, insert the W-LAN supporting SD
card into the 2nd SD card slot.
(Recommendation: Cisco 1231G)
<Testing procedure>
No. Operation
Select "Start" – "Settings"
– "Connections" – "WLAN
Settings" in that order.
In the WLAN Setting screen,
select "WLAN" tab.
1
Check "On" of the "Adapter
power", and tap "OK".
Display
Transmission
W-LAN access point
Display
– 58 –
The read image/data is
displayed on the screen.
Check that the image/barcode
symbol(s) are read correctly.
Tap "Exit" at the bottom left to
close the screen.
Perform the test for all menus:
Scan barcode, Scan several
barcodes, Scan target barcode,
Challenge scanning speed and
Setting.
For other than "Capture image",
the decode message, etc. are
displayed.
Wireless
Test Object
IT-9000
Test Details
Test Details