Casio IT-9000 Series Service Manual page 18

Item
NFC Carrier Frequency
Antenna
Magnetic Field
Bit rate
Modulation Method
Modulation Degree
Readable Distance
Readable Area
(Reference values)
Readable Area
Communication Protocol
SAM Standard
General Specifi cations
MCR Applicable card
No. of tracks
simultaneously readable
Magnetic data reading
surface
Card traveling direction
Card traveling speed
13.56 MHz ± 7 kHz
Magnetic fi eld type loop antenna
Output magnetic fi eld strength when contacting the case: 1.5 A/m or
more
* Based on measuring method of ISO10373-6 (JIS X 6305-6)
Output magnetic fi eld strength when 50 mm apart from the case: 0.15
A/m or more
* Based on measuring method of ISO10373-7 (JIS X 6305-7)
ISO14443 Type A: 106 kbps
ISO14443 Type B: 106 kbps
Felica: 212 kbps, 424 kbps
ISO15693: 1.65 kbps
ASK
10 % modulation, 100 % modulation
ISO14443 Type A/B, FeliCa: 0 mm (Touching the case)
ISO15693: 0 mm (Touching the case) ~ Max. 80 mm
* Depends on the antenna design, etc. of a tag.
ISO15693 (Size: 85 × 54 mm): 50 mm
ISO15693 (Size: 4 mm): 2 mm
40mm × 20mm
* Depends on the kinds of cards and tags.
Standards Supported
ISO14443

Type A
ISO14443

Type B
FeliCa 
(JIS X 6319)
ISO15693 
ISO18092 
Communication
between
terminals
ISO18092 
Card mode
ISO 7816 IC Card standard
Supporting 1.8 V, 3 V and 5 V SAM cards
F2F format (ISO7811-2, ISO7811-6)
3 tracks (ISO7811-2, ISO7811-6)
Single side
Both directions
100 ~ 1500 mm/sec
– 11 –
Specifi cations
Operation-check confi rmed IC
MIFARE Standard
MIFARE Ultralight
JICSAP
* Before introducing, prior confi rmation of
card is required as some cards may be
out of ISO standard.
FeliCa Standard
I•CODE SLI, I•CODE SLI-S, I•CODE
SLI-L, my-d VID plain, my-d Light, Tag-it
plus, Tag-it pro, Tag-it standard
* It will take time to write data to Tag-it.
Also, there are some commands that
require retry on application.
* Not supported by software
IT-9000