Casio IT-9000 Series Service Manual page 32

3. WAN settings (For WAN type only)
[ NOTE ] When replacing the WAN/GPS-MODULE with a new one, be sure to perform the following
procedure.
No. Operation
Start up "WANModuleSetting.
exe" under \\My Device\
FlashDisk\DIAG.
The screen on the right
appears.
1
Tap "OK" to reset IT-9000
once.
After resetting, WAN/GPS-
MODULE setting procedure
takes place.
Upon completion of the
setting, IT-9000 is reset again.
2
Display
– 25 –
IT-9000
Test Details