Casio IT-9000 Series Service Manual page 19

Item
SD Card Slot
Expansion Port
USB Host
Client
Camera Eff ective Pixels
Imaging Element
F Value
Focusing
Focus Range
LED Flash
Speaker
Microphone
<Power Supply/Data Communication Terminals>
Pin No. Name
1 GND
2 D–
3 D+
4 V BUS
5 USB_ID
6 V CRADLE
SDHC/SDIO card supported
Use by connecting a trigger glip
Transmission rate:
Full speed (12 Mbps), Low speed (1.5 Mbps)
External output power: 5 V/500 mA
Transmission rate: Full speed (12 Mbps)
Approx. 2 Megapixels (1,600 x 1,200 pixel)
1/4.0 type CMOS
2.8 ± 5 %
f = 3.45 mm (Auto focus)
10 cm ~ infi nite
21,000 mcd
* In steady lighting state
Warning tone, etc.
Audio input
1 2 3
Function
GND
USB D–
USB D+
USB power control signal
USB host/client switching
Power supply/charge to IT-9000
– 12 –
Specifi cations
4 5 6
Input/Output
IT-9000
IN/OUT
IN/OUT
IN/OUT
IN