Casio IT-9000 Series Service Manual page 79

[ Notes on reassembling ]
After assembling the I-CASE-UNIT, stick the tapes.
FPC (NFC)
[ Notes on reassembling ]
(1) Peel off the release paper from the 2D-SPACER and stick the 2D-FPC to the U-CASE.
(2) Stick the tape (1 place).
(3) Stick the 2D-FPC to the side of the CAM-HOLDER with double-sided tape, and then pass
the 2D-FPC through the guide.
(4) Pass the 2D-FPC thoght the core.
[ NOTE ] The core is stick to the I2-CASE with double-sided tape.
When the I2-CASE is replaced with a new one, stick the core by aligning its
edges with the edges of the I2-CASE as shown.
Double-sided tape
(5) Stick the tapes (2 places).
GPS Cables
FPC (PW-UNIT)
For 2D models
2D-FPC
Tape
Guide
Tapes
– 72 –
IT-9000
Core
I2-CASE